Heat Shield on the Firewall
Burning Brakes
Joined: Apr 2012
Posts: 1,084
Likes: 96
From: Bowmanville Ontario
2026 Loser of the Year
Joined: Sep 2013
Posts: 36,600
Likes: 7,046
From: New Or-leens Loo-z-anna
I used an infrared gun on all interior areas. The hot spots went from 135*F before reflective heat-sound insulation down to ambient air temp after h-s insulation in my non AC car.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Mar 2001
Posts: 5,738
Likes: 644
From: Lincoln, CA
https://www.designengineering.com/fl...e-heat-shield/
It's thick 10 mil aluminum. As long as you have a clean contact for the adhesive is will last forever,
It's thick 10 mil aluminum. As long as you have a clean contact for the adhesive is will last forever,
Le Mans Master
Joined: Mar 2001
Posts: 6,240
Likes: 1,013
From: Watkinsville, GA and Glen Cove, NY
https://www.designengineering.com/fl...e-heat-shield/
It's thick 10 mil aluminum. As long as you have a clean contact for the adhesive is will last forever,
It's thick 10 mil aluminum. As long as you have a clean contact for the adhesive is will last forever,