AC Box Question
Thread Starter
Racer
Joined: Mar 2017
Posts: 250
Likes: 20
From: Boca Raton Florida
AC Box Question
Hey guys, I’m at the halfway point of my engine bay resto. And I’m about to reinstall the AC box and my question is what sealer is used for the box? It was a yellow sealer when I removed The box and I wasnt Sure if a seam sealer was used or not. Thanks
Team Owner
Joined: Sep 2006
Posts: 31,160
Likes: 4,236
From: Westminster Maryland
Hi JP,
You can use the typical 3M strip seam sealer in black.
It's quite similar to what was used originally.
08578
Regards,
Alan
You can use the typical 3M strip seam sealer in black.
It's quite similar to what was used originally.
08578
Regards,
Alan
Last edited by Alan 71; Nov 26, 2017 at 10:59 AM.
Drifting
Joined: Aug 1999
Posts: 1,451
Likes: 84
From: Round Rock TX
I bought the seal kit for mine and it included a black pliable sealant in a roll. I wouldn’t tighten the box up to the firewall (either side) until you have the center gauge and wiper bezel installed. A little alignment issue and you will be hard pressed to get the vent in.
