Finish on kick panel frame pocket
02-10-2019, 03:26 PM
#1
Race Director
Thread Starter
Finish on kick panel frame pocket
Just about to replace the metal box inside both #2 body mount pockets. I hosed both down with Eastwood’s rust encapsulation years ago and removed the decomposing bolts, but never did finish.. Since the pockets will end up looking close to stock, I thought I might as well finish them correctly.
ive seen a number of different colors including black, silver and chromate. Some even look like body color. Is there a correct finish/coating? Car is a 73 if that matters.
ive seen a number of different colors including black, silver and chromate. Some even look like body color. Is there a correct finish/coating? Car is a 73 if that matters.
02-11-2019, 07:09 AM
#3
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
IIRC, 73 birdcages were zinc chromate green.
The following users liked this post:
CA-Legal-Vette (02-11-2019)