Door hardware assembly??
Thread Starter
4th Gear
Joined: Feb 2019
Posts: 4
Likes: 0
From: Tennessee
Door hardware assembly??
I just purchased a 1981 c3. Car runs well and seems to drive..heh however I'm not really been able to drive it outside of the driveway because the previous owner disassembled all the door hardware.
anybody have a reference or guide as to how to assemble these doors they have no door latches no rods no handles installed and I was not the one who uninstalled them so I'm not really sure how they go back. from what little research I have been able to do I have found out you can lock your door permanently if you're not careful.
anybody have a reference or guide as to how to assemble these doors they have no door latches no rods no handles installed and I was not the one who uninstalled them so I'm not really sure how they go back. from what little research I have been able to do I have found out you can lock your door permanently if you're not careful.
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
I had this saved for a future door window replacement project. Might be good reading - http://tech.corvettecentral.com/2011...glass-service/
Good luck with your project
Good luck with your project
Thread Starter
4th Gear
Joined: Feb 2019
Posts: 4
Likes: 0
From: Tennessee
I had this saved for a future door window replacement project. Might be good reading - http://tech.corvettecentral.com/2011...glass-service/
Good luck with your project
Good luck with your project
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,481
From: Southbound
Cruise-In II Veteran
