Help diagnosing cigarette lighter
Racer
Joined: Dec 2016
Posts: 353
Likes: 161
I wanted to use the lighter socket in my 77 for power to a Bluetooth receiver/FM transmitter so I could listen to music off of my phone. No juice for the transmitter when I plugged it in. I got the Dremel tool out and put the cone shaped wire brush on it. I used it to scrub about 40 years worth of crud out of the bottom of the lighter socket and viola, power restored! I’d try simple before you tear into the console. Good luck!
Last edited by Devs77; Mar 3, 2019 at 05:33 PM.
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
Test it to see if you get 12vdc to the 'hot' pin AND that you have a good electrical ground to the casing. If so, replace your lighter. The heating elements fail from use--and possibly from lack of use. You can also check resistance of the lighter coil by measuring from the lighter housing to the center of the heating element. It should measure a low resistance. If it measures as an "open" circuit, replace the element or the lighter.
Last edited by 7T1vette; Mar 4, 2019 at 12:43 AM.
