Heater control question / request
Thread Starter
Burning Brakes
Joined: Oct 2002
Posts: 1,196
Likes: 47
From: Scarborough Maine Fredericksburg VA
Heater control question / request
I am rebuilding the heater control on my 1970. I need two of the little pulleys that the string for the needles run on. I have looked at the usual parts stores and don’t see them. I will put something in the parts for sale section but thought I would also list here in case someone had a set they could part with or know where I could get them. I have two of the four so I need two.
thanks
Steve
thanks
Steve
Racer
Joined: Apr 2020
Posts: 264
Likes: 200
From: Sicklerville NJ
2022 C3 of the Year Finalist - Unmodified
You can get a complete heater control assembly or a reface kit from Paragon or any of the other Corvette parts suppliers . The reface kits will have the parts you need .
Instructor
Joined: Jan 2021
Posts: 142
Likes: 44
From: Lagrange Ohio
That puts it in perspective. Yes, I do have them along with the clips. in a small parts bag. Was going to redo mine .Got started on it then found a nice used one on ebay.
Just didn't get around to tossing the old one in the garbage yet.
Offer still stands. Free
John
Just didn't get around to tossing the old one in the garbage yet.
Offer still stands. Free
John
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: Oct 2002
Posts: 1,196
Likes: 47
From: Scarborough Maine Fredericksburg VA
Yes those are the little "pully's" that i need. I am sure i had all 4 when i took the control apart and i really have no idea where they could have gone to as i put the parts in a little plastic container as i remove stuff. John, i think my contact info is in my profile and/or i will send a PM with my info. Thanks
Steve
Steve