1980 C3 Antenna Bezel
Thread Starter
2nd Gear
Joined: Dec 2022
Posts: 2
Likes: 0
1980 C3 Antenna Bezel
My 1980 C3 with a factory AM/FM/CB radio has a broken antenna cable. I am ready to replace the cable but I need to know if I have to remove the bezel from the top side of the body to get the power antenna unit out. I think I have the rest of it figured out but I did not want to
mess with the bezel if the unit will come out without removing it.
Thanks
mess with the bezel if the unit will come out without removing it.
Thanks
Le Mans Master
Joined: Mar 2004
Posts: 7,503
Likes: 1,511
From: Little Rock AR
Yes you need to unscrew the bezel to remove the antenna from the car. It's not usually that difficult. I have used a pair of 90 degree snap ring pliers and lots of blue tape to protect the paint just in case.
Thread Starter
2nd Gear
Joined: Dec 2022
Posts: 2
Likes: 0
Thanks for the info. The blue tspe is a great idea too. I appreciate the response.
