When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am currently reworking the dashboard on my 1982 corvette. The previous owner has left multiple wires disconnected, open, and frayed. Im almost done but have run into issues with the temperature guage, any guesses why the needle points down? Yes, when i turn the key on the guages all move to reset, this one just seems to be inverted
?
I have a 78, believe it should be the same. There is a same printed circuit board on the back with a bulb. When I exchanged the bulb, I put the PCB in the wrong side and if I recall, I had the same problem. But that was like 18 years ago. Good luck.
I have a 78, believe it should be the same. There is a same printed circuit board on the back with a bulb. When I exchanged the bulb, I put the PCB in the wrong side and if I recall, I had the same problem. But that was like 18 years ago. Good luck.
thanks, i will check them out. I did swap the halogen bulbs to LEDs which could be in the wrong way as well, ill try that out.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
1982 corvette electrical
