U Joint bore prep
Thread Starter
Instructor
Joined: Dec 2011
Posts: 217
Likes: 33
U Joint bore prep
I recently painted my half shafts and U joints. I need to clean the bores for the U-Joints. What is the best way to do this? My thought was emery cloth (scotch brite) pads and use a pick to clean out the clip recesses. If emery cloth doesn't remove the paint/primer/rust, should I use sand paper? If so, what grit? I also have a little steering brush attachment on my dremmel. Should I use a coat of oil inside when reinstalling them? Also, I plan on painting the u joint after it is installed to prevent rust.
Thanks,
Brandon
Thanks,
Brandon
Last edited by vetteman061; Nov 30, 2024 at 11:17 AM.
Melting Slicks
Joined: May 2002
Posts: 2,472
Likes: 754
From: Laporte, IN
The best is a brake cylinder hone to clean them up. Rock Auto usually has the best price.
https://www.rockauto.com/en/tools/br...r+hone,1000977
https://www.rockauto.com/en/tools/br...r+hone,1000977
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,033
Likes: 9,155
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
put some acetone on a rag and wipe off the paint....and put them together.
