throttle cable alignment
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
throttle cable alignment
The gas pedal is hard to push down, it isn't the springs on the carb etc.
The issue is the angle at which the gas pedal rod pulls the cable, It pulls down and adds resistance at the gas pedal. It is really annoying, you can't get a "small" gas increase because of the friction, instead you keep applying pressure and then boom, the pedal goes to the floor.
It looks like the pedal and the swivel for it attached on the FW should be moved up about half an inch, but there isn't any room for it to, or the rod needs to be another 1/2" longer. Anyone else have this issue? It is almost like the rod is too short I guess, and the further you push the pedal, the more the resistance is because the greater the angle.
The issue is the angle at which the gas pedal rod pulls the cable, It pulls down and adds resistance at the gas pedal. It is really annoying, you can't get a "small" gas increase because of the friction, instead you keep applying pressure and then boom, the pedal goes to the floor.
It looks like the pedal and the swivel for it attached on the FW should be moved up about half an inch, but there isn't any room for it to, or the rod needs to be another 1/2" longer. Anyone else have this issue? It is almost like the rod is too short I guess, and the further you push the pedal, the more the resistance is because the greater the angle.
Burning Brakes
Joined: Apr 2003
Posts: 844
Likes: 0
From: Central KY
Is a bracket bent? Sounds strange assuming nothing is binding up... Look at photos of other engines and see if your assembly looks like it is oriented like theirs... Post a photo of yours as well.
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
I don't have a digital, but I'll see if my pic phone can get a good picture of it. You can see where it is binding, where the cable comes out of it's sheath under the dash. I'll try to post tonight.
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
Here is pics
This pic is with gas pedal at normal position
This is with pedal depressed, notice the angle of cable at firewall?
Last edited by ruby76; Feb 1, 2005 at 11:28 PM. Reason: hopfully adding picture
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
pic: 
Above photo, gas pedal not depressed
gas pedal depressed, you can see that where the cable comes through firewall it is at a wierd angle.
Above photo, gas pedal not depressed
gas pedal depressed, you can see that where the cable comes through firewall it is at a wierd angle.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette & Porsche 911: How Two Icons Conquered the Last 25 Years
Joe Kucinski
2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!
Michael S. Palmer
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
It doesn't look to bad from the angle in the picture, I couldn't get my camera up there any better to get the picture. Maybe I'll simply try to WD-40 it or something. It is kind of funny, when you press the gas slowly, it "chirps" like a bird as it finally slips and pulls the cable.
There is no mouse in my pocket, but there is a bird behind my dash!!
There is no mouse in my pocket, but there is a bird behind my dash!!
Safety Car
Joined: Jun 2002
Posts: 4,135
Likes: 1
sounds like you need a new cable. the inside casing is probably binding against the cable ,sounds dangerous if it does go to the floor when you dont want it to. my tach cable went out,so i went ahead and changed them all.gas ,speedo ,,and tach,,and i bought a tube of cable eze and lubed them all up,done for 30 more years..
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,532
Likes: 4
From: Fairview Heights Illinois, near Saint Louis MO, STL C3 Shark
Unfortunately This is a new one. It was installed just before I bought the car. Since I didn't do it, is there supposed to be some lubricant or something that maybe the installer didn't do? I remember on my old truck, I had to grease the speedo cable before installing it or something.
