Free Heads!
Thread Starter
Racer
Joined: Jun 2004
Posts: 322
Likes: 0
From: The Dirty, Dirty South
Free Heads!
So a friend gave me three sets of heads today for free.
1 set 882's
1 set 434's
1 set 993's (mildly ported)
and 1 461 (someone stole the other one
)
which is the best set??
1 set 882's
1 set 434's
1 set 993's (mildly ported)
and 1 461 (someone stole the other one
)which is the best set??
Drifting
Joined: Mar 2003
Posts: 1,608
Likes: 3
From: Canberra AUSTRALIA
St. Jude Donor '05-'06
Originally Posted by Contrail
So a friend gave me three sets of heads today for free.
1 set 882's
1 set 434's
1 set 993's (mildly ported)
and 1 461 (someone stole the other one )
which is the best set??
1 set 882's
1 set 434's
1 set 993's (mildly ported)
and 1 461 (someone stole the other one
)which is the best set??
2. The ones with the biggest valves
3. The ones with the smallest volume (461??) aka Camel Humps
Drifting
Joined: Dec 2004
Posts: 1,714
Likes: 42
From: Austin Texas
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Apr 2003
Posts: 1,323
Likes: 2
From: Castle Hills Texas
If you are going to be a scumbag, at least have the common courtesy to steal both. I would be more PO'd at having to look at the one head that was left. If you are going to be a criminal, at least finish the job and don't half-*** it.
Joe!
Thread Starter
Racer
Joined: Jun 2004
Posts: 322
Likes: 0
From: The Dirty, Dirty South
Originally Posted by CVT4ME
...who in the hell steals one head?
I think I may just use the 434's to learn how to port match and such. Valves are tiny, 1.72/1.50 and the castings are lightweight, they were used on 262 ci Monzas and 305's. The 60cc is attractive, but the valve size is just too small.
Team Owner
Joined: Sep 2003
Posts: 88,393
Likes: 2
From: eville in
Originally Posted by Contrail
Nashville, GA, 35 miles from the Fla line. Small town, lotsa nice folks.
