Master Cylinder Part Question
Thread Starter
Drifting
Joined: Jan 2005
Posts: 1,389
Likes: 9
From: Seabrook Texas
St. Jude Donor '05
Master Cylinder Part Question
I have a 78 Pace Car and I am considering replacing my master cylinder with a new ACDelco Master Cylinder. I see 2 different part #'s
1. ACDelco #174-512 is listed as a master cylinder
2. ACDelco #18M91 is a master cylinder , Durastop
Both are listed for power brakes and have a 1 1/8 inch bore.
Any idea which I should use or does it matter? And what would Durastop be?
THanks!
1. ACDelco #174-512 is listed as a master cylinder
2. ACDelco #18M91 is a master cylinder , Durastop
Both are listed for power brakes and have a 1 1/8 inch bore.
Any idea which I should use or does it matter? And what would Durastop be?
THanks!
Last edited by swtato; Apr 5, 2005 at 09:14 PM.
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
I think Durastop is their trademark name for 'performance' parts.
http://www.acdelco.com/html/pi_brake_line.htm
I'm not sure on your part number. There is an online parts catalog, too.
http://www.acdelco.com/html/pi_brake_line.htm
I'm not sure on your part number. There is an online parts catalog, too.
Thread Starter
Drifting
Joined: Jan 2005
Posts: 1,389
Likes: 9
From: Seabrook Texas
St. Jude Donor '05
Originally Posted by NHvette
I think Durastop is their trademark name for 'performance' parts.
http://www.acdelco.com/html/pi_brake_line.htm
I'm not sure on your part number. There is an online parts catalog, too.
http://www.acdelco.com/html/pi_brake_line.htm
I'm not sure on your part number. There is an online parts catalog, too.
