Hvymtlc5

What after market brand of auto shifter seems to fit well in the stock C3 console with minimal modifaction? I'm looking at a B&M star shifter or a Mega. Would prefer something with a button (for NOS).

scotty13

i have a pro matic 2 in mine.. i required a bit of modification and its own fabricated bracket. now that it is done it looks stock. ill post pictures...


BTW... does anybody know how to post pictures?

cosmicvette

I am very interested in this topic as well! I am after a ratchet shifter and would also prefer to leave the console alone as much as possible. Pics would be great.

cosmicvette

The Money Pit

I have quite a few pics on my website for those intersted,but will forewarn you it is not a "bolt in mod".

scotty13

How do you post pictures?

cosmicvette

scotty13:
go to the HELP FORUM (in the Homepage of this forum) and you will find helpful information on how to post pics.

looking forward to seeing your pics.

EDDIEJ82

The problem with aftermarket shifters is the throw is too long or the frame of the shifter is too high for our consoles. Meaning you will either have to modify the console plate or the shifter frame to make them fit. I always wondered why they don't make one for an exact fit. Anyway here's mine

Hvymtlc5

Money Pit - nice job! What type shifter is that (Mega)?

73 Vet

I've got a Hurst Quarter-Stick to install. If any of you have done this, please post pics and information as to how you did it. The biggest interferance I see is the heater controls. I plan to make my own console, so exact fit with stock console is not an issue. Thanks!

bhays

Looks awesome. Can you share any more about what you did to make it fit?

Hssvett

man I sure could use the help,could u send me some of the pic u have of u putting in your shifter I've been looking all over for some who has done this,and I've got to say man you did a great job hope mine looks as good.hss1991@sbcglobal.net

C3 Stroker

You may check that you are requesting from a 9 year old thread.....a new thread request may get you some info......

palmbeachvette76

Here's a thread I posted a few years ago when I installed a B&M Megashifter in my '76

http://forums.corvetteforum.com/c3-t...post1575215990


Eric

.