When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
received air conditioning system from Hot Rod Air today. Did a little mock-up and installed the HVAC controls on the original thumbwheel controller.
I added some pics to my pictures off to the left....not sure when they'll show up.
Looks like it's going to fit just fine. I couldn't add the mocked-up unit inside the passenger compartment due to daily limit. I'll add that later.
Thank you for your post on the Hot Rod Air system. I am right at the start of this myself. How does the system function? How is the usage of the original factory contols working out. I didn't get any information with the kit about how to convert the controls and the pictures of the rest of the system installation are lacking. You would think a business trying to sell to the corvette after-market would really try hard to supply good documentation. Thanks once again for your picture posting. --muleman
I got the system put together this past week. I was hoping to get it done this past week, however on Friday I had to redo the wiring harness to my fuel injection to go around the A/C box.....well, with the splicing of about 60 wires I must have screwed something up. Car turns over and starts but dies shortly thereafter. Going to do some troubleshooting today see if I can solve that. Meanwhile I have some pictures in my pictures section off to the left here if you want to take a look.
I agree that the instructions need some help. However the individual helping me at Hot Rod Air responds promptly to my emails so I've been getting quick answers to my questions.