Electric water pump / pulley? Help Help Help!
Thread Starter
Advanced
Joined: Jul 2005
Posts: 66
Likes: 0
From: Yuma Az
Electric water pump / pulley? Help Help Help!
I have a problem. I am dropping a 383 stroker in my 79. I bought a CSR water pump, and I need to find a set of serpentine pulleys for my whole set up. I have AC and power steering. Does any one run this setup? Or does anyone know of a kit that would work? Thankyou!!
Race Director
Joined: Mar 2001
Posts: 11,322
Likes: 1
From: Living in the Hartland
Contact these guys, they have one for a set up without air and might be able to help you rig something up for you air. Me I would just run a mech pump to make life much easier.
www.marchperf.com
www.marchperf.com
Racer
Joined: Aug 2004
Posts: 354
Likes: 6
From: Winston Salem NC
The only thing I had to do when I put my electric water pump on, was to put an idler pulley on the lower front alt. bracket to keep the belt off the pump. It took a 52" belt with a 2" pulley to make it work.
Drifting
Joined: Sep 2003
Posts: 1,325
Likes: 6
From: FRANKLIN GA
Originally Posted by FB#1
The only thing I had to do when I put my electric water pump on, was to put an idler pulley on the lower front alt. bracket to keep the belt off the pump. It took a 52" belt with a 2" pulley to make it work.
