A/C bracket & headers
Thread Starter
4th Gear
Joined: Oct 2004
Posts: 4
Likes: 0
From: Toledo Ohio
A/C bracket & headers
Hey gang
Well I'm still learning about the SB 4 spd 69 Vette, planning on Hooker headers and sidepipes.
I see now that the A/C bracket needs to modified to fit around the header tube.
Is there an after market bracket to fit around the Hooker tube?
Do I just grind the crap out of the original one?
Does this have any effect on car value?
Should I just weld and machine a new one?
Thanks!!
Well I'm still learning about the SB 4 spd 69 Vette, planning on Hooker headers and sidepipes.
I see now that the A/C bracket needs to modified to fit around the header tube.
Is there an after market bracket to fit around the Hooker tube?
Do I just grind the crap out of the original one?
Does this have any effect on car value?
Should I just weld and machine a new one?
Thanks!!
Advanced
Joined: Jun 2004
Posts: 96
Likes: 0
From: portland TN
http://www.holley.com/data/Products/Technical/2224-34HKR.pdf
Click on the link above and you can read the instructions for installing the headers. I believe hooker tells you how to modify your existing or sell a different bracket to make the install.
Click on the link above and you can read the instructions for installing the headers. I believe hooker tells you how to modify your existing or sell a different bracket to make the install.
Instructor
Joined: Jul 2000
Posts: 221
Likes: 30
From: columbia mo.
dont use the factory bracket. go to summit -jegs local parts store they have a bracket for the rear of the ac pump it will fit between the tubes.
heres the part no from summit hok-10926hkr hope this helps
heres the part no from summit hok-10926hkr hope this helps
