Throttle cable install help
Thread Starter
Pro
Joined: Jan 2004
Posts: 522
Likes: 0
From: Grayslake IL
Throttle cable install help
How does the throttle cable attach to the rod on the accelerator pedal? I can feel up there with my fingers but can't see the actual connection and therefore can't see how it detaches and reattaches.
Racer
Joined: Dec 2002
Posts: 421
Likes: 2
From: Long Grove, IL
On my 69 there is a plastic piece that snaps into the hole at the top of the rod that the accelerator pedal attaches to. Once you get the plastic piece out there is a slot cut into the rod that the cable will pass through.
Jay
Jay
Advanced
Joined: Jun 2004
Posts: 96
Likes: 0
From: portland TN
I used the lokar piece as well. Very nice, but you really should remove the horizontal mount on the end of the cable that you left on. Once you remove it the cable will have a little ball on it that is just like the factory inner cable and it will fit into the black plastic clip in the throttle pedal arm.
