When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have my radiator/shroud/ a/c condensor, etc. all torn down, and like an idiot didn't take a pic of everything as I disassembled it all.
Any chance I can talk anyone into posting a few pics of their installed seals. The Corvette I'm working on is an '81, so I'd think anything from the mid-70's forward to '82 would do the trick. My assembly manual drawing is very vague, so I'm hoping for a photo to get me on the right track. I count 6 seals in all....
"Rodstoration &am p;quot; In Progres
Joined: Jun 2004
Posts: 1,397
Likes: 1
From: Frisco TX
Originally Posted by kdlp
I have my radiator/shroud/ a/c condensor, etc. all torn down, and like an idiot didn't take a pic of everything as I disassembled it all.
Any chance I can talk anyone into posting a few pics of their installed seals. The Corvette I'm working on is an '81, so I'd think anything from the mid-70's forward to '82 would do the trick. My assembly manual drawing is very vague, so I'm hoping for a photo to get me on the right track. I count 6 seals in all....
Thanks,
kdlp
I don't have any pictures unfortunately but just installed a set on my 80 L48. From what I can recall...two long pieces go on the sides of the radiator...these have a slit in them to allow for them to bend at the top. The third seal goes accross the top sealing the radiator to the radiator support. The remaining pieces were for the top of the support/hood sealing. Two step down pieces are for the ends with the remainder for the areas around the air scoops. I have long since removed the scoop, so didn't need these.