Crane Kool Nuts?
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Crane Kool Nuts?
Anyone using these on a BB? Are you using your stock valve covers? I'd like to keep my stock covers.
What about "double nutting" the rocker arm to the stud?
Want to know what other options/brands/solutions are out there.
Crane Kool Nuts
What about "double nutting" the rocker arm to the stud?
Want to know what other options/brands/solutions are out there.
Crane Kool Nuts
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
You wouldn't happen to have a picture of them installed? How far do they protrude above the rocker?
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
I could yank a valve cover and get a picture but the ystick up probably about 3/8 of an inch above the top of the stud. The locking part is the set screw. However tall the set screw is is the amount it will stick up over the top of the stud. I am also running Comp Cams roller tip arms, has nothing to do with the height though.
