Rev Limiter
Thread Starter
Melting Slicks
Joined: Sep 2004
Posts: 2,412
Likes: 3
Rev Limiter
I have not yet taken my car to the track, but my motor should make power to 6500rpm, so I'm guessing that I'll shift right about there. Where should I set the rev limiter? Would 6800 rpm be too close?
Team Owner
Joined: Apr 1999
Posts: 21,953
Likes: 1,445
From: Reno Nevada
2024 C3 of the Year Finalist- Modified
6500 ------ My drag bike even had an ignition cutout when you shift. My vette also shifts when the motor is misfirering from the rev limiter. That way it's not making any serious HP and blowning up parts behind the engine.
Same thing with two stage rev limiters. The low rpm set is for the burnout also the car is misfiring at the staging lights with a transbrake or clutch until you release and go.
Same thing with two stage rev limiters. The low rpm set is for the burnout also the car is misfiring at the staging lights with a transbrake or clutch until you release and go.
Last edited by gkull; Jan 20, 2006 at 10:28 AM.
