Wiper Switch MisAlignment
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,608
Likes: 3
From: TEXAS - you mean there are other states?
Wiper Switch MisAlignment
The Wiper Switch does not align properly - I do not see any way it can be adjusted. Has anyone else encountered this? In this picture, I am using a broken switch - rather than having the larger 25 cent size head, the remaining shaft has just a piece of the old head sticking out. The bracket does not look bent. It is basically has 90 degree bends in it.
Last edited by kaiserbud; Feb 1, 2006 at 12:25 AM.
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,608
Likes: 3
From: TEXAS - you mean there are other states?
I just went out to the garage to check the bracket - now that I have it out and can take a good look at it - it is a tad out of shape. The angle to the mounting surface is tilted slightly away from the bolt holes and that may make it sag 1/8". Between the upper 2 bends - there is possibly another 1/8". Will check the catalogs tonight to see how much they are - or whether I will be bending them back into shape.
