:
Norval......
Thread Starter
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Norval......
Could you check your email please, and get back to me...
sent you one off the 'other' forum....
need pix or 2 of your installed hydroboost, and some advice...
GENE
sent you one off the 'other' forum....
need pix or 2 of your installed hydroboost, and some advice...
GENE
Thread Starter
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Smoked, I thought he posted them here in a thread recently, but I did a search and can't find them...dunno...someone did, but I dunno....maybe I start another thread now....
GENE
GENE
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
Originally Posted by mrvette
Smoked, I thought he posted them here in a thread recently, but I did a search and can't find them...dunno...someone did, but I dunno....maybe I start another thread now....
GENE
GENE
Try Blackrat he has lots. Do a search.
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
This should answer all your questions
http://forums.corvetteforum.com/show...961&forum_id=3
This has lots of pictures
http://forums.corvetteforum.com/show...367&forum_id=3
On line building
http://forums.corvetteforum.com/show...780&forum_id=3
http://forums.corvetteforum.com/show...961&forum_id=3
This has lots of pictures
http://forums.corvetteforum.com/show...367&forum_id=3
On line building
http://forums.corvetteforum.com/show...780&forum_id=3
Thread Starter
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Thanks, Norval, what was there was very similar to what I came up with,...I was mystifying about that slot/tab/bolt to keep the hydroboost from rotating, I allready figgered it out by time this was all posted...I just clamped the hydro b rod in a vice and cut 3/8 24 threads on it with a die, and screwed on the old booster fork works like a charm....I will put some locktite on it,
my only concern is mounting that unit, I dunno what to secure the bolts to the inside of the firewall with, as I want studs facing out...to make furure service easy....what a PIA...had to tear out the entire dash assy for nothing....not that mine is hard or anyting due to being highly modded, course I can't even see that clevis pin with everything together anyway....
GENE
my only concern is mounting that unit, I dunno what to secure the bolts to the inside of the firewall with, as I want studs facing out...to make furure service easy....what a PIA...had to tear out the entire dash assy for nothing....not that mine is hard or anyting due to being highly modded, course I can't even see that clevis pin with everything together anyway....
GENE
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
Originally Posted by mrvette
Thanks, Norval, what was there was very similar to what I came up with,...I was mystifying about that slot/tab/bolt to keep the hydroboost from rotating, I allready figgered it out by time this was all posted...I just clamped the hydro b rod in a vice and cut 3/8 24 threads on it with a die, and screwed on the old booster fork works like a charm....I will put some locktite on it,
my only concern is mounting that unit, I dunno what to secure the bolts to the inside of the firewall with, as I want studs facing out...to make furure service easy....what a PIA...had to tear out the entire dash assy for nothing....not that mine is hard or anyting due to being highly modded, course I can't even see that clevis pin with everything together anyway....
GENE
my only concern is mounting that unit, I dunno what to secure the bolts to the inside of the firewall with, as I want studs facing out...to make furure service easy....what a PIA...had to tear out the entire dash assy for nothing....not that mine is hard or anyting due to being highly modded, course I can't even see that clevis pin with everything together anyway....
GENE