my custom ls1 air filter setup
Melting Slicks
Joined: Nov 2003
Posts: 2,668
Likes: 119
From: St. Charles Mo
CI 5 & 8 Veteran
Pat, nice work 
I think you might have broken the code for me with RamJet. I might be able to do something similar? Not sure in my case how I might get cold air channeled to the intake system. Maybe off the back end of the first L-88 lip?? Or, build a hood chamber that channels the air around the sides of the high rise ram intake.
Geezz, hangin around here sure causes alot of work
Bullshark
I think you might have broken the code for me with RamJet. I might be able to do something similar? Not sure in my case how I might get cold air channeled to the intake system. Maybe off the back end of the first L-88 lip?? Or, build a hood chamber that channels the air around the sides of the high rise ram intake. Geezz, hangin around here sure causes alot of work
Bullshark
Racer
Joined: Mar 2000
Posts: 352
Likes: 0
From: Frisco, TX
Tell me about it Bullshark. Thanks to you, I am now sectioning and raising my L-88 hood similar to what you did. If it doesn't turn out too hideous, I will post pictures when I am done.
Pat, very clean execution. Please post pics when you get the scoop sorted out.
Pat, very clean execution.
Please post pics when you get the scoop sorted out.
Thread Starter
Le Mans Master
Joined: Jul 2001
Posts: 9,622
Likes: 16
From: absecon nj
bullshark something like that should work great for you
thanks aflac-just remember pictures always make things look alot better.
cory,all the ls1 guys you know up there you should be able to get plenty of parts together.we could be twins again.
i was gone to put the hood back on today after helping xotic work on his pantera decklid aligning that but its so cold right now ill wait till later this week.
thanks aflac-just remember pictures always make things look alot better.
cory,all the ls1 guys you know up there you should be able to get plenty of parts together.we could be twins again.
i was gone to put the hood back on today after helping xotic work on his pantera decklid aligning that but its so cold right now ill wait till later this week.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
yeah but I dont wanna go through all this crap again 
mine still doesnt even run (you can thank the weather, and a broken heater)
btw, try fixing a heater in this crap
mine still doesnt even run (you can thank the weather, and a broken heater)
btw, try fixing a heater in this crap
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Pat, you did a LOT of nicer work, and improvements to my concept of 8 years ago, for that downflow cowl induction....
BB hood scoop, over a stock hood, and hole up front to meet air cleaner in a box.....rubber gasket...
mine is sorta crude looking by now, being street driven and largely neglected from a cruise night/show aspect....
but I working on some other crap now, sometime soon, I will take pix of the latest mods....
GENE
BB hood scoop, over a stock hood, and hole up front to meet air cleaner in a box.....rubber gasket...
mine is sorta crude looking by now, being street driven and largely neglected from a cruise night/show aspect....
but I working on some other crap now, sometime soon, I will take pix of the latest mods....
GENE
Team Owner
Joined: Oct 2004
Posts: 23,831
Likes: 10
From: Springfield MO
St. Jude Donor '07
Originally Posted by Yellow73SB
O i just saw that it was steel and thought it weighed alot. Good job.
Pat, the intake looks great!
