radiator seals
Thread Starter
Burning Brakes
Joined: Apr 2005
Posts: 1,227
Likes: 0
From: Atlanta Ga
radiator seals
IM getting ready to drop the radiator back in to my 81 but all the radiator/brace seals are missing. Is it a must have to install these seals? SHould i order them or just move forward?
Race Director
Joined: Aug 2000
Posts: 18,478
Likes: 3
From: Quincy IL
you need these foam pieces imho. you can fashion some foam strips for each side of the radiator from wherever you can find foam, home depot, lowe's, even a fabric material place carries foam rubber. the hard part wil be finding or making pieces that fit between the hood and the top of the radiator support in the corners.
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
Buy the pre cut ones. They are not that expensive and will fit the first time. It will make the car run cooler. I just replaced all mine and it was about 40 bucks for all of them even the one that seals to the hood.
Burning Brakes
Joined: Apr 2000
Posts: 1,012
Likes: 0
From: Minnesota
Originally Posted by Steve COSD
. These foam seals are what forces the air through the radiator instead of around it. Call Dr. Rebuild for good quality.
Good Luck
Steve
Good Luck
Steve
Ditto
SEMPER FI--1970 Dave
Le Mans Master
Joined: Aug 2003
Posts: 7,720
Likes: 12
From: Chattanooga TN
Originally Posted by Steve COSD
If you don't do it now you will kick yourself later. These foam seals are what forces the air through the radiator instead of around it. Call Dr. Rebuild for good quality.
Good Luck
Steve
Good Luck
Steve
