Ahhh! Grrr...
Thread Starter
Melting Slicks
Joined: Sep 2004
Posts: 2,412
Likes: 3
Ahhh! Grrr...
F*** me! Why am I such an idiot? I used laytex sealant instead of silicone (looks the same) at the ends of my intake manifold. Of course I didn't realize that as I was doing this, but 7 days later and it's still not dry, hmmm...My question to all of you, can I reuse my FelPro gasket with the blue bead of silicone? The motor has not been turned on yet (no coolant flow, no oil splash, no heat). But the intake has been torqued down fully. What do you guys think?
And since I'm going to be in there can someone better explain the RTV around the water passages. (Where exactly am I supposed to put it?)
Le Mans Master
Joined: Jan 2006
Posts: 8,319
Likes: 7
From: Wilmington DE, Drive it like you stole it, 68 327 4 speed coupe
Originally Posted by torqvette
So you guys don't think that the gasket is trash now after torquing it down once?
What about the RTV for the water passages?
What about the RTV for the water passages?
use a nice thick bead and you dont even need that gasket
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Dec 2005
Posts: 2,441
Likes: 0
re-use 'em, and smear a thin coat of rtv on the water passages, and around the ports if you feel the need. Do it on the intake side only for an easier removal next time.
Last edited by shafrs3; Mar 9, 2006 at 08:53 PM.