Demon carb question
Thread Starter
Melting Slicks
Joined: Apr 2002
Posts: 2,337
Likes: 14
From: Norfolk VA
Demon carb question
I have a mighty demon mechanical secondary carb and I have a question about the various ports on the carb. There are two ports on the fuel line(s) side of the carb. Are they for the vacum advance (manifold, ported)? for the distributor? Then there is the one on the backside of the carb is that one for the for the brake booster? All help is appreciated. Thanx in advance.
Last edited by Oldguard 7; Mar 13, 2006 at 01:45 PM.
Tech Contributor
Joined: Aug 1999
Posts: 14,382
Likes: 6,401
From: At my Bar drinking and wrenching in Lafayette Colorado
The rear port on the passenger side is manifold vacuum. The forward port is ported vacuum. The port in the back of the carb is manifold vacuum for PCV or other accessories, such as brakes.
Thread Starter
Melting Slicks
Joined: Apr 2002
Posts: 2,337
Likes: 14
From: Norfolk VA
Originally Posted by lars
The rear port on the passenger side is manifold vacuum. The forward port is ported vacuum. The port in the back of the carb is manifold vacuum for PCV or other accessories, such as brakes.
Tech Contributor
Joined: Aug 1999
Posts: 14,382
Likes: 6,401
From: At my Bar drinking and wrenching in Lafayette Colorado
I haven't received an e-mail from you... check address:
V8FastCars@msn.com
I understand a few of you are pulling for another Tuning for Beer Tour out there - that sounds like great fun..! I just need to get my travel schedule and job stabilized enough to be able to commit to a date to see all of you again - looking forward to it!!
V8FastCars@msn.com
I understand a few of you are pulling for another Tuning for Beer Tour out there - that sounds like great fun..! I just need to get my travel schedule and job stabilized enough to be able to commit to a date to see all of you again - looking forward to it!!
