Heater Blower Wiring
Thread Starter
Racer
Joined: Jan 2001
Posts: 495
Likes: 0
From: ma
Heater Blower Wiring
After wondering why I was not getting any air flow through the air ducts I have found that the fan wires were cut ,the high speed blower relay missing along with the wires to the fan switch gone.Just got the wires on the relay hocked back up along with the resistor for the speed control.Now do these wires plug into to any kind of harness?Or do they go directly to the speed switch on the consel?There are no wires in the center consal area,I have figured out the conections to the switch[what speed go to what terminals]but do they go to a harness or do i have to rewire them thriugh the fire wall?Hope this makes sense? Thanks all for any help before I dive into this dashboard!!!! :confused:
