Holley/Weber part info
Thread Starter
Racer
Joined: Mar 2006
Posts: 309
Likes: 0
From: Ocean City MD
Holley/Weber part info
I bought a box full of Holley parts. I was planning on building another 750 to try on the vette. In the box is an aftermarket metering plate made by Weber. It appears to have external jets. Can anyone give me any info on it? I might try to use it but would like to know a little more about it. Thanks.
Le Mans Master
Joined: Oct 2000
Posts: 8,897
Likes: 1,357
From: Santa Ana CA
I also have one of those around here somewhere that never got installed.
As I recall, it would change the spacing on the float bowl slightly such that the air cleaner dimple would not line up with the float adjustment nut.
As I recall, it would change the spacing on the float bowl slightly such that the air cleaner dimple would not line up with the float adjustment nut.
Thread Starter
Racer
Joined: Mar 2006
Posts: 309
Likes: 0
From: Ocean City MD
Yes it is thicker than a standard metering plate. I just can't find any info. I even emailed Weber to see if they could help. I would assume that since info is hard to find and they are not easily come by that they are not worth the trouble. If they were they would still be making them.
