critique my work please
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 2,130
Likes: 1
From: mesa,az
critique my work please
Ok I set the rear subframe in for the prostreet. I put it in place with a few heavy tack welds. I will bring it to a freinds to be TIG welded in soon. What I did was locate the center line of the frame. Then I set the A arms mounting points at the same height and set the lower 4 link mounting points at the same height. Useing the grease fittings on the upper ball joints to measure from I got the distance the same to the lower links mounting bolts both diagonaly and parallel to the frame rails while making sure the crossed strings intersected over the center line of the frame. This should insureall four suspension points are in line. correct? Any thoughts. The engine in tranny have in there is just to put some weight on the front suspension. Wanted to make the referance points as close as I could to when the car is on the road.
Thanks
Greg
Thanks
Greg
Last edited by panchop; Jun 11, 2006 at 08:13 PM.
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
Looks good to me, I like that extra k member you put in there in front of it. Is that little orange thing up front going to try to turn over
those big tires??
those big tires??
Last edited by Little Mouse; Jun 11, 2006 at 06:18 PM.
