Quadrajet Fitting
Thread Starter
Pro
Joined: Oct 2000
Posts: 629
Likes: 1
Quadrajet Fitting
I'm in the process of installing braided fuel lines on my '79 while I'm doing my big block conversion. My plan is to run the Quadrajet that came on my '79, which works flawlessly, especially since Lars worked his magic on it.
To complete the fuel system, my problem is I need to find a part number for the fitting at will adapt my 8AN fitting to my 1979 Quadrajet. I already bought the 7/8-20 fitting only to find out that it doesn't fit. But now I cannot seem to find the correct one! Help please!
My lines and fittings I've used are all from Russell's
To complete the fuel system, my problem is I need to find a part number for the fitting at will adapt my 8AN fitting to my 1979 Quadrajet. I already bought the 7/8-20 fitting only to find out that it doesn't fit. But now I cannot seem to find the correct one! Help please!
My lines and fittings I've used are all from Russell's
Last edited by Indynut; Jun 11, 2006 at 10:49 PM.
Drifting
Joined: May 2005
Posts: 1,629
Likes: 4
From: Somers CT
Yes, one does exist, I have one too. If Jeckel doesn't find his number I might be able to later tonight. Be prepared to ditch the filter inside the carb if you have the long one, it won't fit with this new adaper that must be used. I ended up having to put an inline filter in. By the time I was done with my stupid fuel line I could have bought a top of the line tire for the same $$. I think Summit might have the fitting.
Bill
Bill
Instructor
Joined: May 2006
Posts: 168
Likes: 0
From: Florence NJ
Originally Posted by lars
It's Russell part number 640350. This has the 1"-20 threads for the carb and a -8 AN inlet. Unfortunately, a -6 inlet is not available.
