Sparkplug wires.
Thread Starter
Burning Brakes
Joined: Apr 2005
Posts: 1,227
Likes: 0
From: Atlanta Ga
Sparkplug wires.
what wires are you guys running? application. Im looking for set of wires i can run from dist. down and over valve cover and onto plugs.
seems every set i find has wires that are WAY to long and couple little short. Im sure theres an application that would be a closer wire to what i need for an 81
seems every set i find has wires that are WAY to long and couple little short. Im sure theres an application that would be a closer wire to what i need for an 81
Drifting
Joined: Nov 2003
Posts: 1,634
Likes: 4
From: Northern NJ
St. Jude Donor '04 & '05
If you get any cut to fit set and install your own boots, you will get the "right" fit no matter how you want to route your wires. 
Here's a set of Accels I put on my 75 last year before trimming/boot installation and again after everything was in place. Not the most fancy, but they work.
Good Luck!
Racer
Joined: Apr 2006
Posts: 417
Likes: 0
From: Tacoma Washington
Originally Posted by Jclgodale3
I used a set of Taylor SpiroCore Universal application wires. You cut them to length and apply the distributor ends for a perfect fit, however you want them to run...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Race Director
Joined: Sep 2004
Posts: 11,874
Likes: 263
From: Arlington Va Current ride 04 vert, previous vettes: 69 vert, 77 resto mod
this is from MSD 8.5 made to go over the valve covers...moroso makes a really nice set with a wire loom
[IMG]
[/IMG]
i replaced those spark plug wire seperators withe the ones like inthe first photo
[IMG]
[/IMG]
[IMG]
[/IMG]i replaced those spark plug wire seperators withe the ones like inthe first photo
[IMG]
[/IMG]
Advanced
Joined: Sep 2003
Posts: 69
Likes: 0
From: near Syracuse NY
Originally Posted by bobs77vet
this is from MSD 8.5 made to go over the valve covers...moroso makes a really nice set with a wire loom
Melting Slicks
Joined: Jul 2004
Posts: 3,248
Likes: 48
From: westland mi
Originally Posted by Jclgodale3
I used a set of Taylor SpiroCore Universal application wires. You cut them to length and apply the distributor ends for a perfect fit, however you want them to run...
thats also what i used
