VBP front mono bar setting
Drifting
Joined: Oct 2004
Posts: 1,890
Likes: 7
From: Newcastle Oklahoma
Originally Posted by 68 NJConv 454
Smooth72, where'd you get that front end with those fenders? I like those grills cut into the inner fenders. That will look real sweet painted with an L88 or muscle hood.
Here is the rest of the front
Drifting
Joined: Oct 2004
Posts: 1,890
Likes: 7
From: Newcastle Oklahoma
Originally Posted by Kalway
Curious, how hard is it to do the monoleaf conversion on the front? I'd imagine it's not super hard, but what would be a time estimate of how long it'd take to do?
Melting Slicks
Joined: Jul 2004
Posts: 3,248
Likes: 48
From: westland mi
Originally Posted by Smooth72
Mine was already torn down give vbp a call, great people to work with. The bigger the kit the more discount. Here is the rear.
http://s65.photobucket.com/albums/h2...r23m/?start=80
Safety Car
Joined: Dec 2004
Posts: 4,071
Likes: 0
From: San Diego CA
Originally Posted by rosslato
if you're just doing the swap and no cleaning i'd say easily within 8 hrs start to finish. u will also need to get an alignment
Melting Slicks
Joined: Jul 2004
Posts: 3,248
Likes: 48
From: westland mi
Originally Posted by Kalway
Would an alignment with the monobar front be done the same way as stock, with shims? Or is it a different process? Still learning about this system so I'm soaking it all now before I buy it and install it. It'll be next on my things to do list, after the 2004R.
Drifting
Joined: Oct 2004
Posts: 1,890
Likes: 7
From: Newcastle Oklahoma
Originally Posted by rosslato
Smooth72, heres a similar frameoff and parts like yours, but diff colors.
http://s65.photobucket.com/albums/h2...r23m/?start=80
http://s65.photobucket.com/albums/h2...r23m/?start=80
