Where does this wire go?
Melting Slicks
Joined: Mar 2005
Posts: 2,838
Likes: 10
From: Austin TX
If that resistor wire is 'hot' as you say, you need to remove it or at least cap it.
Also, for clarification,..the brown wire from the starter solenoid to the coil is only hot when the key is in the "start' position,..not "on". The resistor wire is hot either way.
Also, for clarification,..the brown wire from the starter solenoid to the coil is only hot when the key is in the "start' position,..not "on". The resistor wire is hot either way.
