pro street progress
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 2,130
Likes: 1
From: mesa,az
pro street progress
well got the body on so i can do a little more measuring and planning. what a pain. 6 guys and an engine lift took us two hours then another two for me to shift things around. when it comes back off i will figure something else out.
Not a lot of room in there.
I'll make a fiberglass tub inside .
I'm not sure how much stock stuff I will keep in the interior. Probably cost more to keep vette stuff in there then just building something totaly custom
I'm OK with the way the front sits.
Think I can pull the wheels up into the wells a couple more inches by adjusting how the 4 link is set.
I turned 48 saturday. I'd like to be driving down the road with this view before I hit the big 50.
Not a lot of room in there.
I'll make a fiberglass tub inside .
I'm not sure how much stock stuff I will keep in the interior. Probably cost more to keep vette stuff in there then just building something totaly custom
I'm OK with the way the front sits.
Think I can pull the wheels up into the wells a couple more inches by adjusting how the 4 link is set.
I turned 48 saturday. I'd like to be driving down the road with this view before I hit the big 50.
Last edited by panchop; Aug 21, 2006 at 10:18 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
