Spal fan with Programable Control grounding
Thread Starter
Burning Brakes
Joined: Feb 2003
Posts: 1,128
Likes: 4
From: Upland Ca
Spal fan with Programable Control grounding
I'm installing my new Dewitts rad with spal fan and programable controler. The instruction say to take the large black wire directly to the battery for grounding. Can I just ground it real well to the core support, run over to the block, or take it to the battery ground at the block? Thanks for the advice, Lee
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
Originally Posted by Lee H
I'm installing my new Dewitts rad with spal fan and programable controler. The instruction say to take the large black wire directly to the battery for grounding. Can I just ground it real well to the core support, run over to the block, or take it to the battery ground at the block? Thanks for the advice, Lee
Any good ground location will work to engine anf frame so long as the ground wire is sufficient size to handle the load, and that the mouting location for that ground is bare metal. Very important.
