82 brake installation
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
use a socket, also coat the rubber lip with a bit of black RTV before sliding it in the piston groove, this will help keep dirt out of the bores and keep your calipers leak free for a longer time
Last edited by Twin_Turbo; Oct 15, 2006 at 04:52 PM.
Racer
Joined: Sep 2006
Posts: 484
Likes: 0
From: McComb Ms.
he means a socket the same circumference of the metal ring on your seal, and tap the socket so it presses against the whole surface of the seal ring. I would assume when you tap one corner of the ring it pops out opposite of where you are tapping. just don't get crazy and force it becasueyou will bend it out of whack and never get it straightened back out
