Delco PMGR Starter bolts

Reply Subscribe

Thread Tools

Search this Thread

Oct 22, 2006 | 12:43 PM

blackss69

Thread Starter

5th Gear

Joined: Jun 2006

Posts: 5

Likes: 0

Delco PMGR Starter bolts

I have a Delco gear reduction mini starter from a 90's Chevrolet truck. I need to install it on a 69 350 block. It has staggered bolt pattern for 168 tooth flywheel. Does anyone know the correct knurled bolts to use?. The starter has metric holes but the block is 3/8-16 threads.

I previous post mentioned a GM conversion bolt but did not give a part number. The bolt length is approx 4 1/4 inches and should have knurl along with the diameter changes due to metric holes.

Thanks

Oct 24, 2006 | 01:07 PM

blackss69

Thread Starter

5th Gear

Joined: Jun 2006

Posts: 5

Likes: 0

I found an old GMPP Catalog and under starter bolts they list a 3/8-16 x 4 21/64 starter bolt. The length appears correct and the bolt is listed as "special shouldered bolt". The pn is 14097278. Before ordering a quantity 5 has anyone seen these bolts. They might be for the gear reduction mini starter on an old block.

Thanks

Oct 25, 2006 | 10:01 AM

JPhil

Burning Brakes

Joined: Oct 2004

Posts: 763

Likes: 0

From: Loveland Colo

Pt# 12338064, Qty (2)

John

Oct 25, 2006 | 12:05 PM

KapsSA

Safety Car

Joined: Jun 2004

Posts: 4,371

Likes: 223

From: Beecher Illinois

Try the "Help!" section(prepackaged parts)in your local auto parts store.

Reply Subscribe