1981 engine rebuild - help please
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,307
Likes: 1
From: Milford Haven Pembrokeshire
1981 engine rebuild - help please
Ok - started the rebuild. pistons are in and new cam, oil pump etc.
Pistons have different letters and numbers on them.. J and H ??
Started cleaning up the alloy 58cc heads, that all looks ok.
But when I unpacked the ebay Rochester - not so good !!!!!! Choke missing. etc.
So, for the timebeing. remember I am in the UK........ can I use this one ?????
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA%3AIT&rd=1
Can always pick up a new one when I go to Florida in January.
No puter anymore
Pistons have different letters and numbers on them.. J and H ??
Started cleaning up the alloy 58cc heads, that all looks ok.
But when I unpacked the ebay Rochester - not so good !!!!!! Choke missing. etc.
So, for the timebeing. remember I am in the UK........ can I use this one ?????
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA%3AIT&rd=1
Can always pick up a new one when I go to Florida in January.
No puter anymore
Last edited by hensen1954; Oct 28, 2006 at 02:20 PM.
Racer
Joined: Aug 2006
Posts: 330
Likes: 3
From: Wellington, New Zealand
In short you can use any carb you want, but it will effect the performance and gas bill. It sounds like you will only use it short term so no worries, coming from a big block the jet metering will be wrong but your car will run and in January you can get the right one.
