Pypes Exhaust is looking for a test car
#1
Burning Brakes
Thread Starter
Member Since: Apr 1999
Location: Texas
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Pypes Exhaust is looking for a test car
These guys probably had a volunteer about 4 nanoseconds after posting this but just in case, those of you in the Pa. area might want to check this out...
http://www.pypesexhaust.com/testcars.html
regards
.
.
.
http://www.pypesexhaust.com/testcars.html
regards
.
.
.
#2
Melting Slicks
Sent in to volunteer my car, their reply:
"Thanks for the offer. We currently have an in-house vehicle for the
testing. The production kit should be available early spring. thanks"
Kit available early spring, interesting. It will be worth checking into at least. They did say mandrel bent, which is why this could be interesting.
"Thanks for the offer. We currently have an in-house vehicle for the
testing. The production kit should be available early spring. thanks"
Kit available early spring, interesting. It will be worth checking into at least. They did say mandrel bent, which is why this could be interesting.
Last edited by 69autoXr; 01-08-2007 at 11:54 AM.
#3
Former Vendor
Member Since: Dec 2006
Location: Hatfield PA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Guys, We're going to try and support these forums by contributing occasional exhaust system advice now that we are expanding into the Vette market. We'll also update you on the progress of the new C3,C4,C5 & C6 systems. You C3 owners especially have been ignored for way too long. We were shocked to see there is no mandrel bent pre-boxed systems for the C3.
#6
Melting Slicks
Guys, We're going to try and support these forums by contributing occasional exhaust system advice now that we are expanding into the Vette market. We'll also update you on the progress of the new C3,C4,C5 & C6 systems. You C3 owners especially have been ignored for way too long. We were shocked to see there is no mandrel bent pre-boxed systems for the C3.
Thanks
#7
Intermediate
Member Since: Feb 2006
Location: Birmingham AL
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Guys, We're going to try and support these forums by contributing occasional exhaust system advice now that we are expanding into the Vette market. We'll also update you on the progress of the new C3,C4,C5 & C6 systems. You C3 owners especially have been ignored for way too long. We were shocked to see there is no mandrel bent pre-boxed systems for the C3.
#9
Melting Slicks
Guys, We're going to try and support these forums by contributing occasional exhaust system advice now that we are expanding into the Vette market. We'll also update you on the progress of the new C3,C4,C5 & C6 systems. You C3 owners especially have been ignored for way too long. We were shocked to see there is no mandrel bent pre-boxed systems for the C3.
I did take it for a ride the other day... my pipes only made it through the tranny crossmember so far. Talk about killer sound!
#11
Intermediate
Member Since: Feb 2006
Location: Birmingham AL
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
#12
Melting Slicks
Its about freekin time!
#13
Melting Slicks
Originally Posted by 74L82Cpe
... where have the Corvette-oriented vendors been on this?