Correct Q-jet base gasket?
Thread Starter
Race Director
Joined: Apr 2003
Posts: 19,345
Likes: 654
From: Tampa, Florida
Correct Q-jet base gasket?
Is this the correct gasket for a Q-jet with a stock '69 350 intake?
http://store.summitracing.com/partde...5&autoview=sku
I searched around my intake looks like this one.
http://forums.corvetteforum.com/show...3+piece+gasket
What size thread are carb to intake bolts?
Thanks,
Jim
http://store.summitracing.com/partde...5&autoview=sku
I searched around my intake looks like this one.
http://forums.corvetteforum.com/show...3+piece+gasket
What size thread are carb to intake bolts?
Thanks,
Jim
Last edited by jim2527; Mar 22, 2007 at 02:15 PM.
Tech Contributor
Joined: Aug 1999
Posts: 14,356
Likes: 6,332
From: At my Bar drinking and wrenching in Lafayette Colorado
That's one of 3 gaskets you need. The stainless gasket shown gets sandwiched between 2 other special gaskets. I have all 3 gaskets as a kit if you need it:
V8FastCars@msn.com
$15
Lars
V8FastCars@msn.com
$15
Lars
Thread Starter
Race Director
Joined: Apr 2003
Posts: 19,345
Likes: 654
From: Tampa, Florida
That's one of 3 gaskets you need. The stainless gasket shown gets sandwiched between 2 other special gaskets. I have all 3 gaskets as a kit if you need it:
V8FastCars@msn.com
$15
Lars
V8FastCars@msn.com
$15
Lars
Tech Contributor
Joined: Aug 1999
Posts: 14,356
Likes: 6,332
From: At my Bar drinking and wrenching in Lafayette Colorado
