Frame dimensions
Thread Starter
Advanced
Joined: Nov 2006
Posts: 67
Likes: 0
From: Western MA
Frame dimensions
I tried doing a search but come up with no hits. I'm looking for frame specs and dimensions to make sure the frame I'm using for a build is square and true. Any help/links would be appreciated.
Thanks
Thanks
Racer
Joined: Oct 2006
Posts: 412
Likes: 1
From: St. John's Newfoundland
I have one in pfd. format, but I can't figure out how to attach the link. If you e-mail me : cboyd@nl.rogers.com I would be more than happy to send it to you.
Clyde
Clyde
Le Mans Master
Joined: Apr 2004
Posts: 7,106
Likes: 38
From: Newark DE
Thread Starter
Advanced
Joined: Nov 2006
Posts: 67
Likes: 0
From: Western MA
Thanks for the links.
Upon close inspection after getting the frame back from the sandblasters it appears that it has been in a front end collision at some point. There are some welds in areas there shouldn't be any. I'll be taking it down to the local frame shop and having them put it on the jig to make sure it's square.
Upon close inspection after getting the frame back from the sandblasters it appears that it has been in a front end collision at some point. There are some welds in areas there shouldn't be any. I'll be taking it down to the local frame shop and having them put it on the jig to make sure it's square.
Safety Car
Joined: Aug 2001
Posts: 4,883
Likes: 11
From: North Easton Mass
Post some pics of the suspect areas. There are a lot of welds on the C3 frame that look like they were done by a demented person. GM didn't need no stinkin' robots when they built the C3's. 
Rick B.
Rick B.
