Confirm thread size.....Please.
Thread Starter
Racer
Joined: Oct 2005
Posts: 469
Likes: 0
From: West Slope of the Sierras California
Confirm thread size.....Please.
Had new t/a's installed yesterday. Mech. said I need a new castle nut for the outer strut rod/shock mount. Said bubba found a way to destroy the nut and leave the threads on the stud perfect. Is this a 5/8 fine thread? Can barely get my calipers on it. Thanks.
Drifting
Joined: Oct 2003
Posts: 1,426
Likes: 1
From: VetteMOD
St. Jude Donor '05-'07
Go to www.mcmastercarr.com and search for 95030A250. Looks like $4.45 for 10 of them. You may be able to get them individually. I buy lots of hardware and materials from them. 95% of the time the stuff shows up the next day and they really get good rates on shipping (much better than I get).
While you are on their site, try there search engine. You will end up buying a bunch of other stuff
While you are on their site, try there search engine. You will end up buying a bunch of other stuff
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Oct 2005
Posts: 469
Likes: 0
From: West Slope of the Sierras California
Thanks guys for the assistance. Was at a buddies and had him look in his stuff and lo and behold....there was ONE! Yep, been to mcmastercarr, great place. Dealt with them in the past. Hillco Fastener Warehouse in Garden Grove, CA is another great place. Lot's of hard to find factory fasteners of all types.
Burning Brakes
Joined: Jul 2006
Posts: 1,047
Likes: 12
From: SoCal
I've been using Hillco for a long time. They even carry Bowtie chrome bolts that you can purchase individually. And about any kind of stainless fastener that you can think of. Great place and nice people to deal with too!