Casting Numbers Question
Thread Starter
Intermediate
Joined: Aug 2001
Posts: 41
Likes: 0
Casting Numbers Question
I'd like to find out more about these heads. Casting# 3991492. These are cast iron angle plug heads. I'd like to know what are the size of the valves and combustion chamber volume? I also like to know what year and car this distributor came from, delco-remy #1110385, its a dual point, no vac adv, with a tach drive.
Also posted in engine mod section
Thanks in advance
Also posted in engine mod section
Thanks in advance
Burning Brakes
Joined: Jul 2001
Posts: 1,160
Likes: 0
From: Ajax Ontario
Re: Casting Numbers Question (bungoo2u)
According to my book....your heads are 1973 Camaro/Corvette hi perf heads for a 350. Would imagine they are 2.02/1.60 but that's based on fact listed as hi perf, not directly specified in my source. I can't find a distributor with that number in my book. Sorry....
Race Director
Joined: Apr 1999
Posts: 15,133
Likes: 477
From: NM
Re: Casting Numbers Question (bungoo2u)
The Mortec site http://www.mortec.com has two listings.
3991492....70......350..........LT1,Came l hump,accessory holes,64cc, straight plug
and
3991492....70-up................over the counter,Camel hump,64cc, straight or angle plug
tom...
3991492....70......350..........LT1,Came l hump,accessory holes,64cc, straight plug
and
3991492....70-up................over the counter,Camel hump,64cc, straight or angle plug
tom...
