Zz4 Header Help
Thread Starter
Intermediate
Joined: Apr 2007
Posts: 43
Likes: 0
From: Virginia Beach VA
Zz4 Header Help
I am putting a zz4 crate motor in my 72 vert. Looking for some recommendations on headers. I looked at the products suggested in another thread and when I called the suppliers they told me they would not work. Headers in question were Dougs by THERMALTECH and Patriot engine huggers. I was told neither of these were a workable solution. All comments and/or suggestions welcome.
Racer
Joined: Jan 2006
Posts: 395
Likes: 0
From: Orange massachusettes
I put a ZZ4 in my 72 coupe, and am using Flow tech ceramic coated headers. They match up well to the ZZ4's D shaped exhaust port. I DONT have a.c. NOR do I have power brakes. I DO have a 4spd. They fit perfect! No banging or "dinging" of any kind. I paid around $335 at local speed shop, but have seen them mail order for about $290. Hope this helps.
Advanced
Joined: Feb 2006
Posts: 58
Likes: 0
From: terrebonne quebec
I am putting a zz4 crate motor in my 72 vert. Looking for some recommendations on headers. I looked at the products suggested in another thread and when I called the suppliers they told me they would not work. Headers in question were Dougs by THERMALTECH and Patriot engine huggers. I was told neither of these were a workable solution. All comments and/or suggestions welcome.
