rebuilding trailing arms
Melting Slicks
Joined: Nov 2003
Posts: 2,362
Likes: 1
From: San Antonio TX
Of course you can. You need to rent a set of tools and get a spindle overhaul kit at .... Under articles and tips it has the spindle rebuild step by step guide and if you want to return the tools afterwards you can.
________________________________________ ________________________________________ ___________
Supporting vendors pay for the considerable bandwidth charges on the Forum, making it free for the rest of us. In exchange, they get the privilege of using the Forum to market and promote their goods and services.
Forum members are welcome to sell a Corvette or Corvette parts they purchased for their own personal use. Anything else is considered to be a commercial sale.
No links or reference to eBay sales, please. If the sale is appropriate for the Forum, post it on the Forum, rather than linking to it elsewhere.
Members are not prohibited from mentioning it when they have a good (or bad, for that matter) experience with a non-supporting vendor. But such mentions cannot be so specific (address, phone number, e-mail address, URL, price, part number, etc.) and so frequent that they become marketing and promotional references.
________________________________________ ________________________________________ ___________
Supporting vendors pay for the considerable bandwidth charges on the Forum, making it free for the rest of us. In exchange, they get the privilege of using the Forum to market and promote their goods and services.
Forum members are welcome to sell a Corvette or Corvette parts they purchased for their own personal use. Anything else is considered to be a commercial sale.
No links or reference to eBay sales, please. If the sale is appropriate for the Forum, post it on the Forum, rather than linking to it elsewhere.
Members are not prohibited from mentioning it when they have a good (or bad, for that matter) experience with a non-supporting vendor. But such mentions cannot be so specific (address, phone number, e-mail address, URL, price, part number, etc.) and so frequent that they become marketing and promotional references.
You know it is okay to help another forum member with the info they need to enable them to do there own work if they wish to do so. That is what the forum is for.
If they wish to farm out the work then I also agree that we have some good vendors that can do this for a forum member as well.
But again after all is said and done we are here to help each other.
