Bair's Corvette
Thread Starter
Instructor
Joined: Jul 2001
Posts: 137
Likes: 0
Bair's Corvette
I took my 71 to Bairs yesterday for some suspension work. These guys are excellent. They spent 1 hour with me reviewing the scope of work they would recommend-while my car was on the lift. Also, I toured their shop and got an overview of all their refurbishing practices from sandblasting to finishing to bearing grades. These guys are serious suspension experts. It's hard to find people like this in this business. Left my car with them. It will be finished in a week. I'll keep you posted.
Team Owner
Joined: Aug 2000
Posts: 21,457
Likes: 463
From: Massillon,Ohio USA
2020 C3 of the Year Finalist - Unmodified
Cruise-In VI Veteran
St. Jude Donor '08-'09-'10-'11-'12
Re: Bair's Corvette (mulchie)
Yeah, those guys are amongst the "best in the business". I've bought many used parts out of their "attic", and they did the bearings on three out of four cars of mine. I live about 110mi away, so I just take them my parts to be rebuilt at the beginning of the week, and then return to pick them up Friday!!! :D
Safety Car
Joined: Dec 1999
Posts: 3,602
Likes: 837
From: PA
Re: Bair's Corvette
Yeah, those guys are amongst the "best in the business".
Regards,
Thread Starter
Instructor
Joined: Jul 2001
Posts: 137
Likes: 0
Re: Bair's Corvette (mulchie)
That will be one smooooth ridin' LT-1. Front/rear suspension rebuild, new ps slave set-up and rear-end rebuild. Throw in a ps rebuild and it will ride better than the day it left the factory. Not cheap-but I know it will be done right.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Intermediate
Joined: Jul 2001
Posts: 37
Likes: 0
Re: Bair's Corvette (GDaina)
Xracer, check out my steel cities LT-1 while your their. I'd be interested in whether or not they have it torn-down yet. Also, aks to check out all the parts in the attick.
mulchie/lt1man
mulchie/lt1man
Safety Car
Joined: Mar 2001
Posts: 3,725
Likes: 0
From: Rochester NY
Re: Bair's Corvette (LT1man)
LT1man,
Your car is really nice. What a car but it was still in one piece. I got the grand tour of the place including the attic. Man could I lose a few bucks in that place. The best thing was that Brian gave me a few tips on how to NOT spend money. A good one was to turn the steering wheel to the right when storing the car. It keeps the power steering ram in the tube so it won't rust or create a grove in the shaft from the seal at the straight position. The frame they have from a 79 as the show model was unreal. Mine sure dos not look like that!
Joe
Your car is really nice. What a car but it was still in one piece. I got the grand tour of the place including the attic. Man could I lose a few bucks in that place. The best thing was that Brian gave me a few tips on how to NOT spend money. A good one was to turn the steering wheel to the right when storing the car. It keeps the power steering ram in the tube so it won't rust or create a grove in the shaft from the seal at the straight position. The frame they have from a 79 as the show model was unreal. Mine sure dos not look like that!
Joe
