Help!!! Turn signal switch problems
Thread Starter
Racer
Joined: Apr 2007
Posts: 357
Likes: 0
From: Porters Lake Nova Scotia
Help!!! Turn signal switch problems
i have a 1970 corvette with tilt-tele steering and the key wont come out of the ignition. It will turn to off but wont go to auxiliary nor will the key come out. So i am attemping to remove the whole ignition lock but i have run into some problems. The turn signal switch with the 2 plastic peices wont come out. I noticed that they are connected to some wires and i was wondering do i have to remove these peices in order to get to the ignition lock. If so, how to i remove these two plastic peices?
Instructor
Joined: Aug 2006
Posts: 219
Likes: 2
From: Visalia CA
Jim Shea directed me to these sites when I was having an issue with my Tilt/Tele. Exact directions on tearing down the column.
http://jimshea.corvettefaq.com/wp-co...D&R226JA04.doc
http://jimshea.corvettefaq.com/wp-co...lumnBlowup.doc
http://jimshea.corvettefaq.com/wp-co...D&R226JA04.doc
http://jimshea.corvettefaq.com/wp-co...lumnBlowup.doc
Last edited by RxForPain; Aug 13, 2007 at 08:52 PM.
Racer
Joined: May 2007
Posts: 285
Likes: 0
From: Ga.
