Rear Ride Height

Reply Subscribe

Thread Tools

Search this Thread

Oct 8, 2007 | 01:30 AM

Palengke

Thread Starter

Advanced

Joined: Jun 2004

Posts: 64

Likes: 0

From: San Diego CA

Rear Ride Height

My '74 L48 coupe had a recently rebuilt front end with poly bushings and new KYB gas shocks all around. Even before the rebuild my rear end seem to be riding lower than the front. Riding on 255-60-70 BF Goodrich, the tire to wheel well distace is greater in front the in the rears. How can I raise the rear end of the car to make it look "proportional" compared to the front.

Oct 8, 2007 | 01:48 AM

LB66383

Drifting

Joined: Dec 2002

Posts: 1,946

Likes: 28

From: Long Beach CA

The rear ride height is adjusted with the bolts going through the ends of the spring. You can get bolts that are threaded most of the way so you can set the height anywhere you want.

Oct 8, 2007 | 09:41 AM

Van Steel

Premium Supporting Vendor

Joined: May 2000

Posts: 4,312

Likes: 70

From: Clearwater FL

What is the ride height at? Front & Rear. Mesaure from the ground to the center of the wheel well lip. Your rear spring could be worn, thats why I ask.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump