Optional Roof Panel Carrier For 1980-82
#22
Carrier bolts
I have that option on my 82. I also have the carrier and leather case that mounts onto straps on the right back side wall in the car. I installed the carrier once just to see how it worked. I would never carry my original glass tops on the back of my car. I could see the tops coming lose and flying off the back of the car on the freeway.
What condition are the bolts in you have? Are they all faded? Pics? Thanks
What condition are the bolts in you have? Are they all faded? Pics? Thanks
Thanks
#23
Melting Slicks
The 80 L82 car I had came with the carriers. I used them in town without issues but was never brave enough to try them on the highway. They mounted the tops quite firmly, they probably would have been fine at highway speeds. They are pretty ugly mounted on the car without the tops on them.
I saw a Corvette for sale not too long ago that had the carriers with it, but they described them in the ad as snow ski carriers. I had to chuckle.
Mike
I saw a Corvette for sale not too long ago that had the carriers with it, but they described them in the ad as snow ski carriers. I had to chuckle.
Mike
#24
Melting Slicks
The Roof Carrier option was made in Canada. It was a dealer installed option. It was a GM part, and You could buy it across the parts counter. As far as I know no car left the factory with it installed, but if ordered with the car it came in the car, to be installed by the dealer. I ordered mine across the parts counter and did the install. The mounts that went into the Fiberglass were Plastic with a steel insert and I considered them the weakest part.
#25
Instructor
I carry my tops on my luggage rack all the time, it's a 77 and the system is a little different but I have no concerns after the first time I used them. They do make it tough to put gas in, as the tops cover the gas door.
#26
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,470 Likes
on
1,249 Posts
Cruise-In II Veteran
The chrome luggage racks were dealer options.
The following users liked this post:
BV85 (01-28-2017)
#27
Melting Slicks
When I got mine it came with the drawings to show where to drill the Holes. It was all in a Box. The Straps to hold the Tops on had Canadian Maple Leaf decals on them.