Door Panel Question
Burning Brakes
Joined: Jan 2001
Posts: 1,004
Likes: 16
From: Gainesville, Florida
Re: Door Panel Question (mrbeaubo)
They're on the lower corners of each panel & used to secure the panel to the door. They clip under panel material & have an eyelet sticking out for a screw that goes into the door. When you take the screw out they remain with the panel.
Mark
[Modified by mdsmith, 10:55 PM 12/15/2001]
Mark
[Modified by mdsmith, 10:55 PM 12/15/2001]
Racer
Joined: Nov 2001
Posts: 355
Likes: 1
From: Pennsville NJ
Re: Door Panel Question (mrbeaubo)
Where can you get those clips? I'm assuming you're talking about the plastic pieces with the teeth that fit together to hold the panels on. One on each door doesn't stick anymore and I've been wanting to fix it.
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 1,244
Likes: 24
From: Austin TX
Burning Brakes
Joined: Jan 2001
Posts: 1,004
Likes: 16
From: Gainesville, Florida
Re: Door Panel Question (VTHokie77Vette)
I'm assuming you're talking about the plastic pieces with the teeth that fit together to hold the panels on. One on each door doesn't stick anymore and I've been wanting to fix it.
http://www.docrebuild.com/dr-r-web/DR-PAN4.PDF
Mark
Drifting
Joined: Aug 2001
Posts: 1,708
Likes: 0
From: North Carolina
Re: Door Panel Question (mdsmith)
ya what mdsmith said.
They are metal, they are located
1) on each door jamb, toward the bottom
2) down by the kick panel on the door itself that one should lay flat, the other one bends away from the door panel.
Its hard to explain, but there are 2 per door, and 4 total per car.
As for the plastic peices...those suck, they surve no purpose that I can see, aside from anti-rattle purposes, but then again my window rattles, so whats one more area rattling?
Daniel
They are metal, they are located
1) on each door jamb, toward the bottom
2) down by the kick panel on the door itself that one should lay flat, the other one bends away from the door panel.
Its hard to explain, but there are 2 per door, and 4 total per car.
As for the plastic peices...those suck, they surve no purpose that I can see, aside from anti-rattle purposes, but then again my window rattles, so whats one more area rattling?
Daniel
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
